Asbestos was mined and used commercially in North America beginning in the late 1800s. Its use increased greatly during World War II. Since then, it has been used in many industries. For example, the building and construction industry has used it for strengthening cement and plastics as well as for insulation, fireproofing, and sound absorption. The shipbuilding industry has used asbestos to insulate boilers, steampipes, and hot water pipes. The automotive industry uses asbestos in vehicle brakeshoes and clutch pads. More than 5,000 products contain or have contained asbestos. Some of them are listed below:
The regulations described above and other actions, coupled with widespread public concern about the hazards of asbestos, have resulted in a significant annual decline in U.S. use of asbestos: Domestic consumption of asbestos amounted to about 719,000 metric tons in 1973, but it had dropped to about 9,000 metric tons by 2002. Asbestos is currently used most frequently in gaskets and in roofing and friction products.
- Asbestos cement sheet and pipe products used for water supply and sewage piping, roofing and siding, casings for electrical wires, fire protection material, electrical switchboards and components, and residential and industrial building materials;
- Friction products, such as clutch facings, brake linings for automobiles, gaskets, and industrial friction materials;
- Products containing asbestos paper, such as table pads and heat-protective mats, heat and electrical wire insulation, industrial filters for beverages, and underlying material for sheet flooring;
- Asbestos textile products, such as packing components, roofing materials, and heat- and fire-resistant fabrics (including blankets and curtains); and
- Other products, including ceiling and floor tile; gaskets and packings; paints, coatings, and adhesives; caulking and patching tape; artificial ashes and embers for use in gas-fired fireplaces; plastics; vermiculite-containing consumer garden products; and some talc-containing crayons.
The regulations described above and other actions, coupled with widespread public concern about the hazards of asbestos, have resulted in a significant annual decline in U.S. use of asbestos: Domestic consumption of asbestos amounted to about 719,000 metric tons in 1973, but it had dropped to about 9,000 metric tons by 2002. Asbestos is currently used most frequently in gaskets and in roofing and friction products.